Why it's perfect for your home:

Superior Quality: Made from thick, durable vinyl that is waterproof, oil-proof, and incredibly easy to clean with a damp cloth.

Easy DIY Installation: Just peel and stick. The grid lines on the back make measuring and cutting a breeze, even for beginners.

Rental-Friendly & Removable: Update your space without the commitment. It removes cleanly with no sticky residue, protecting your walls and furniture.

Versatile Design: Ideal for creating an accent wall in the living room, adding a touch of romance to the bedroom, or refurbishing tired furniture like cabinets, liners, and bookshelves.

Removal Tips: To remove peel and stick wallpaper safely, gently heat a small section with a hair dryer, immediately use the plastic putty knife to lift a corner of the warmed section, pull the wallpaper back slowly and steadily​ against itself. Patience is critical!

4 Simple Steps to a Flawless Finish

1. Clean & Prep: Wipe your target surface with a damp cloth to remove all dust, grease, and debris. Ensure the surface is completely dry before starting. For best results, use on smooth, flat surfaces.

2. Measure & Cut: Measure the height of your wall or the dimensions of your furniture. Use the integrated grid lines on the backing paper to cut your panels, leaving an extra 1–2 inches at the top and bottom for trimming.

3. Peel & Stick: Peel back about 6 inches of the backing. Align the top of the panel with your starting point. Slowly peel away the remaining backing with one hand while smoothing the wallpaper onto the surface with the other.

4. Smooth & Trim: Use a squeegee, soft cloth, or a credit card to push air bubbles out from the center to the edges. Once the panel is secure, use a sharp craft knife to trim the excess material at the top and bottom.

Pro Tips for a Professional Result

1. Avoid the Stretch: High-quality vinyl can stretch if pulled too hard. Gently guide the paper onto the wall rather than pulling it down to ensure the squares stay perfectly geometric.

2.The Hairdryer Trick: For rounded corners (like on furniture or cabinet edges) or stubborn air bubbles, use a hairdryer on a low-heat setting. This makes the vinyl more pliable and helps the adhesive form a stronger bond to curves.

3. Overlap Slightly: When joining two rolls, we recommend a tiny overlap (about 1/10th of an inch) rather than aligning the edges perfectly side-by-side. This prevents gaps from appearing if the house settles or the temperature changes.